Feature Emission spectrometry using high-frequency inductively coupled plasma as a light source is suitable for analysis of solution samples. We support a wide range of analytical evaluations, from trace elements to high-concentration analysis.
Separation and identification analysis of volatile substances
Equipment name Gas chromatography
Feature This separation analysis method is suitable for separating and identifying volatile substances with boiling points up to 700°C. Various conditions can be set according to the purpose, and it is also possible to measure trace components and analyze many components at once.
Observation equipment
Magnified observation
Equipment name Scanning electron microscope (SEM)
Feature This is a microscope that uses electron beams to obtain magnified images of surfaces from several tens to hundreds of thousands of times. Electron beams have extremely short wavelengths compared to visible light, and can be used to analyze finer unevenness and compositions than optical microscopes.
Equipment name Cross session polisher
Feature A cross-sectional sample preparation device for scanning electron microscopy (SEM). High-quality cross-sections can be obtained in a short time without individual differences.
Equipment name Microscope
Feature Magnify the surface and record the condition as a photograph.
Reliability test equipment
Corrosion acceleration test
Equipment name CASS testing instrument
Feature This is an accelerated corrosion test. Examine the corrosion resistance by spraying the CASS liquid.
Equipment name Salt spray testing instrument
Feature This is also an accelerated corrosion test. Corrosion resistance is checked by spraying with salt solution.
Temperature and Humidity Test
Equipment name Constant temperature and humidity tester
Feature Adhesion, corrosion, etc. are evaluated under durability/lifetime tests and constant temperature/humidity conditions.
Light resistance test
Equipment name light resistance tester
Feature Examine the fading and deterioration of resin due to xenon irradiation.
Wear test
Equipment name Eraser tester (abrasion resistance tester)
Feature We measure and evaluate the state of wear caused by various abrasives.
Adhesion strength test
Equipment name Dupont drop impact tester
Feature Evaluate the adhesion strength of the film against impact.
Measuring equipment
Film thickness measurement (for metal film)
Equipment name Fluorescent X-ray film thickness gauge
Feature Measure and evaluate the film thickness of the metal film.
Film thickness measurement (for resin film)
Equipment name Surface roughness meter
Feature Measure and evaluate the film thickness of the coated resin film.
Pencil hardness measurement (for resin film)
Equipment name Pencil hardness tester
Feature Measure and evaluate the pencil hardness of the coated resin film.
